Exhibitor Products

Capturing and sequestering CO₂ emissions for a sustainable future.

This independent market and technology report provides a comprehensive assessment of the key green hydrogen production technologies, including AEL, PEMEL, AEMEL, and SOEC, covering developments in mat ...

We offer a range of product in the fields of measurement and safety technology.

The CONTIBAC® candle filter combines efficient slurry thickening with clear filtrate production. It provides reliable, fully enclosed operation for continuous or semi-continuous processes.

Specified for processes where containment, yield, and cake quality cannot be compromised.

IE-LIFT™ is a compact, zero-emission hydrogen fuel cell battery replacement for 24V, 36V and 48V material handling equipment. Powered by Intelligent Energy's proven fuel cell technology, it delivers a ...

The V&F HydrogenSense is a combination of an electron impact (EI-MS) and an ion-molecule reaction (IMR-MS) mass spectrometer in one analyzer unit to measure all impurities in hydrogen for PEM fuel cel ...

The HSense is available with different gas inlet systems to compensate for pressure variations, optimize the amount of sample gas withdrawn, and ensure accurate measurement. Any impurity due to conden ...

The IKA Master Plant homogenizing and dispersing system is a universal mixing system for the production of catalyst inks or platinum and iridium based slurries for the MEA production.High safety level ...

KA specializes in process systems for continuous or discontinuous inline powder feed into liquids.These are mixing and dispersing systems such as the Master Plant for the production of emulsions and s ...

The IKA magic PLANT is a laboratory scale process plant for batch wise mixing and dispersing of catalyst inks for MEA production.All relevant process functions like heating/cooling, pressure/vacuum, s ...

The CO2Sense is used in CCS applications and has been deployed in various projects that adhere to specifications such as Northern Lights, Porthos, and Aramis.Additionally the CO2Sense is used in food- ...

The Seitz HyValve range of products was developed for the refuelling of hydrogen for pressures of up to 1000 bar.Through the valves’ compact design and by not installing air pipes as with pneumatic sy ...

qCf FC12/100 LC High Amp - Test system for high current densities with a new cooling system featuring adjustable contact pressure and tool-free assembly

qCf short stack 5.25/125 LC - PEM short stack tester up to 5 cells 25 cm² for PEM-electrolysis and fuel cells

qCf FC25/125 LC 8 bar Ely - AEM & PEM electrolysis test system 8 bar with 25cm² or 5cm² active area and precise control of the contact pressure applied to the active area

qCf FC5/2x63 LC 50 bar Ely - PEM electrolysis qCf test system, 50 bar g, with an active surface area of 5 cm² andprecise control of the contact pressure applied to the active area

Energy Without LimitsTHE INTELLIGENT MULTI-FUEL ENERGY PLATFORM FOR A SUSTAINABLE AND RELIABLE ENERGY SUPPLY.One platform. Four fuel options. Limitless possibilities. The GENSET delivers clean, flexib ...

With the new JUMO TAROS H48 Ex, we are proud to introduce a new highlight in our product portfolio.

The JUMO safetyM TA is a fault-tolerant safety limiter for monitoring various process variables, combining flexible safety functions with high plant availability.

One Platform from catalyst to full stack: scalable EIS for hydrogen technologies with the Zahner IM7

From PEM to AEM water electrolysis, ENERICH engineers the critical porous transport interface for high-performance electrolyzers. Our powder-sintered Ti-PTL for PEM and Ni-mPL™ for AEM combine precisi ...

TEONEX® is a high-performance PEN (Poly Ethylene Naphthalate) film developed for demanding industrial applications.

Direct Air Capture (DAC) is a key technology for the targeted capture of CO₂ directly from the atmosphere.Using chemical and physical processes, carbon dioxide is effectively removed from the ambient ...

This robust and maintenance-free blower technology is designed by Eberspächer VAIREX for highly efficient thermal management and air delivery across a wide range of automotive and industrial applicati ...

Robust, no-maintenance cathode air compressors by Eberspächer VAIREX are critical for the functionality of modern fuel cells in both mobile and stationary applications. Our customers vary widely; appl ...

The Hydrogen Recirculation Blower (HRB), jointly developed by Purem by Eberspächer and Eberspächer VAIREX, is a key component for maximizing the efficiency of modern fuel cell systems.By continuously ...

Robust, high-performance Cathode Isolation Valve from Purem by Eberspächer are essential components for protecting and enhancing the lifetime of modern fuel cell systems.Designed for demanding mobile ...

Advanced water separator solutions by Purem by Eberspächer are designed to ensure efficient water management in fuel cell cathode air systems, supporting reliable and high-performance operation across ...

Advanced silencer solutions by Purem by Eberspächer are specifically engineered for air intake and exhaust systems in fuel cell applications, ensuring optimal acoustic performance in demanding environ ...

Visible steam formation is one of the previously underestimated aspects of operating mobile fuel cell systems. The De-Hydrator ensures effective water management, reduces the relative humidity in the ...

The hydrogen market faces critical challenges, including material compatibility issues like embrittlement, safety concerns due to its flammability, leakage risks, and inefficiencies in storage and dis ...

High-performance O-Rings developed for hydrogen applications, where sealing reliability and material compatibility are essential. OringOne compounds have been tested by the independent laboratory TÜV ...

AERZEN process gas compressors are installed as single or multi-stage units in chemical, petrochemical, raw material or energy producing plants and in many other production centres of the processing i ...

Lightweight & Safe Easy-to-handle nozzle for hydrogen fillingIn addition to being incorporated into our own dispensers, we also have experience in stand-alone sales.

Finding the right specialists in highly technical markets requires more than traditional recruiting. Bark recruiting+ connects companies in hydrogen, measurement and sensor technology with specialists ...

Ohmium designs, manufactures, and deploys modular, scalable Proton Exchange Membrane (PEM) electrolyzers that enable cost-competitive green hydrogen production. The company’s suite of electrochemical ...

The EQ-DA Pro controller is a digital electro-pneumatic actuator module for Equilibar® dome-loaded, pilot-operated control valves. It regulates pilot (dome) pressure to enable highly accurate and dyna ...

Equilibar Back Pressure Regulator: Patented technology for excellent controlThe Equilibar back pressure regulator maintains the upstream pressure at its own inlet. The patented technology enables high ...

KOBELCO's Hybrid Solution combines an oil-free screw compressor with reciprocating compressors to provide a highly efficient and reliable hydrogen compression system. Designed for large-scale hydrogen ...

Potentiostat/Galvanostat• Two modules in one enclosure: one with higher current for charging and one with higher resolution for hydrogen measurement• High resolution interface: 24 bit data acquisition ...

Electrical gas heaters for all gases and vaporizers for liquid gas

UFI HYDROGEN is dedicated to research and development, implementation, and industrialization of MEA Technology – Membrane Electrode Assembly – catalyzed membranes for four types of applications: green ...

x

The H2iVE-SKID module is built on a platform that can be easily integrated into standardised containers.

OPW Clean Energy Solutions was formed in December 2021 when OPW acquired both ACME Cryogenics and RegO® Products. Since then, the company has continued to expand its reach as a supplier of clean-energ ...

Hydrogen measurement very precise and selective. The CA Complex Analyzer will measure Hydrogen (H2) qualitative and quantitative in all possible gas mixtures in a very fast and very precise way. Wasse ...

Fast gas chromatography – In common applications, the CGC Compact GC measures up to 10 gas components qualitatively and quantitatively with high precision and selectively in just a few seconds.Schnell ...

Easily measure the smallest hydrogen impurities. The Purity Analyzer measures hydrogen impurities in ppm range easily and quickly up to a gas purity of 99.999% (Grade 5.0).Kleinste Wasserstoff Verunre ...

The H2i-POWERPACK is a compact unit consisting of several AEM-stacks arranged on an innovative carrier element.

Hydrogen is increasingly utilised in many industries – be its use in the steel or chemical industry as a preferred energy source, as a raw ingredient for a wide range of processes or as a drive gas fo ...

AMBARtec addresses this by integrating the electricity and heating sectors: hydrogen produced from surplus renewable electricity (e.g. via electrolysis) is safely stored using AMBARtec's iron-oxide nu ...

In collaboration with our partner company, Rouge H2 Engineering AG, AMBARtec AG provides an alternative method of producing high-purity hydrogen. This process utilises carbon-containing gases, such as ...

The demands on supply security and energy efficiency are increasing—especially in complex grids with decentralized generators and dynamic loads. Bachmann electronic responds to this with a comprehensi ...

Fig.131 is a three-piece heavy duty ball valve designed for reliable performance in demanding industrial applications.The robust three-piece construction allows the end caps to be welded directly to t ...

Fig.223/224 butterfly valves are based on a concentric design with multiple unique solutions. The curved slope of the seat sealing surface, combined with an extended sealing area at the flange connect ...

Bachmann electronic is presenting a new innovative SCADA solution that has been specially developed for energy management in an increasingly networked and hybrid energy industry. forsiteSCADA, which i ...

Bachmann electronic's Smart Power Plant Controller (SPPC) has become established worldwide as a solution for precise power management. Over the past ten years, the company has installed more than 7,00 ...

Advanced gasket solutions for flange connections in hydrogen transport and storage – combining long-term stability, demanding leakage performance and verified H₂ gasket characteristics.

Adhesive-free gasket technology for demanding hydrogen and oxygen applications – engineered for electrolyser peripheral systems as well as hydrogen transport and storage.

Custom-engineered PTFE sealing solutions for alkaline and PEM electrolysers – precisely designed for individual cell geometries and demanding hydrogen production applications.

For the multimodal movements of compressed hydrogen

AGC Plasma Technology Solutions provides advanced plasma coating solutions for PEM electrolyzers and fuel cells, enabling durable, conductive and cost-efficient protection of critical components such ...

For the multimodal transportation of compressed hydrogen

For the multimodal transportation of hydrogen

Our hydrogen tank testing solutions support manufacturers and test facilities throughout the complete tank validation process, from homologation and type approval to batch validation and production te ...

ProcedureOur gas tank welding system has been specially developed for welding gas tank liners madeof plastic (e g PA, HDPE). The welding system works on the principle of hot plate or infraredwelding. ...

In-line measurement of catalyst coating weight for CCM and electrode production. The system measures precious metal loading directly on the moving web, giving coating lines real-time feedback instead ...

Vahterus’ unique Plate & Shell Heat Exchanger (PSHE) is at the forefront of heat-exchanger technology. The core is a fully welded plate pack enclosed in a strong shell structure, which eliminates the ...

Integrated H₂ and O₂ process analysis system combining gas analyzers and a customized sample conditioning system for reliable monitoring in hydrogen production processes.

AI-based thermal and smoke detector combining dual optical smoke sensors and a thermistor sensor for fast and reliable early fire detection in industrial equipment and safety applications.

High-sensitivity smoke detector featuring dual optical sensors, AI-based signal processing and automatic reset for fast and reliable early smoke detection.

High-sensitivity smoke detector featuring dual optical sensors and AI-based signal processing for fast and reliable early smoke detection in industrial equipment and safety applications.

Trace oxygen analyzer designed for continuous measurement of low-level O₂ from 0 to 1,000 ppm in hydrogen and industrial process gas applications.

Multi-channel gas monitoring receiver designed for centralized monitoring and alarm management of multiple gas detectors in hydrogen and industrial safety applications.

5-channel multi-gas analyzer designed for simultaneous and continuous measurement of CH₄, CO₂, H₂, CO and O₂ for hydrogen production and industrial process monitoring.

High-performance CO₂ gas analyzer designed for continuous process monitoring, providing precise measurement from 0 to 2,000 ppm using NDIR technology.

High-performance methane gas analyzer designed for continuous process monitoring, providing reliable CH₄ measurement from 0 to 100 %Vol using NDIR technology.

Explosion-proof fixed oxygen gas detector designed for continuous O₂ monitoring, providing reliable measurement from 0 to 25 %Vol for industrial and hydrogen safety applications.

Explosion-proof fixed hydrogen gas detector designed for continuous H₂ leak monitoring, providing reliable detection from 0 to 100 %LEL for industrial and hydrogen safety applications.

High-performance oxygen gas analyzer designed for hydrogen production and process monitoring, providing fast and reliable O₂ concentration measurement from 0 to 99.99 %Vol.

High-performance hydrogen gas analyzer designed for hydrogen production and process monitoring, providing fast and reliable H₂ concentration measurement from 0 to 99.99 %Vol.

MOD-1040 Oxygen Analyzer is designed to provide accurate and reliable in-situ measurements of oxygen levels in high-pressure pipelines, making it ideal for a range of industrial applications. With its ...

Formic acid a strong carboxylic acid and the simplest organic acid. It is a convenient and bio-degradable compound for acidification in a variety of applications.

Sodium formate is a free-flowing white solid with excellent water solubility. A variety of potential uses are reported from environmentally friendly de-icing to high performance drilling fluids.

Potassium formate is a free-flowing white solid with excellent water solubility. A variety of potential uses are reported including: crop fertilization, inclusion in household cleaners and performance ...

Our Dyna-Loop sustainable methanol concept offers a relatively simple, reliable, flexible and efficient solution for converting (surplus) renewable energy into green platform chemicals and e-fuels. Ad ...

HH-WIN is Hamburg’s hydrogen distribution network for industry. Starting operations in 2027 with around 40 kilometres of pipelines, the network will connect industrial users in and around the Port of ...

Kiwa provides end-to-end testing, inspection, certification and homologation services for hydrogen mobility. From high-pressure cylinders, components and vehicle systems to hydrogen refuelling infrast ...

Hiperbaric's hydrogen compression technology is made up of a range of compressor units that offer a complete Plug & Play solution to safely, efficiently and reliably dispense compressed H2 at high pre ...

Our custom-made DAC units allow our customers to test 8 materials at the same time under the exact same conditions. This ensures that any differences they see in the results come from the differences ...

To produce our ceramic membranes, we use or extrusion technology with proprietary technologies for crystal growths allowing for production of highly selective membranes characterized by high permeabil ...

Our BZA375 fuel cell system is the answer to the heavy-duty long-haul requirements. More than 30 years of experience in fuel cell system development, and optimization and production with automotive fo ...

Application of honeycomb structure ceramics has been proven as a reliable and effective technology in automotive exhaust gas purification.

The hydrogen sensor is a Clark-type H₂ sensor designed for precise measurement of dissolved and gaseous hydrogen in laboratory research, pilot-scale systems, and industrial R&D environments. It is wid ...

The QGA 2.0 system is a bench top mass spectrometer designed for real time gas analysis. Gas analysis by mass spectrometry provides for fast quantitative analysis of multiple gas and vapour species.De ...

The Saipex Hydrogen Readiness Index (HRI) is a proprietary assessment framework designed to evaluate and guide the integration of hydrogen into new, revamped, or blending process facilities. By conduc ...

As a single point of contact for process plant delivery, Saipex provides integrated Engineering, Procurement, and Construction Management (EPCM) services. We combine process safety, multi-disciplinary ...